|
TIRONE LEVELS
Overview
Tirone Levels are a series of horizontal lines that identify support and resistance
levels. They were developed by John Tirone.
Interpretation
Tirone Levels can be drawn using either the Midpoint 1/3-2/3 method or the Mean method.
Both methods are intended to help you identify potential support and resistance levels
based on the range of prices over a given time period. The interpretation of Tirone Levels
is similar to Quadrant Lines.
Example
The following chart shows Midpoint Tirone Levels
on Lincoln National.
The dotted line shows the average price. The top and bottom lines
divide the range between the highest and lowest prices into thirds.
Calculation
Midpoint Method
Midpoint levels are calculated by finding the highest high and the lowest low during the
time period being analyzed. The lines are then calculated as follows:
Top line: Subtract the lowest low
from the highest high, divide this value by three, and then subtract this result from the
highest high.
Center Line: Subtract the lowest
low from the highest high, divide this value by two, and then add this result to the lowest
low.
Bottom Line: Subtract the lowest
low from the highest high, divide this value by three, and then add this result to the
lowest low.
Mean Method
Mean levels are displayed as five lines (the spacing between the lines is not necessarily
symmetrical). The lines are calculated as follows:
Extreme High: Subtract the lowest
low from the highest high and add this value to the Adjusted Mean.
Regular High: Subtract the lowest low from
the value of the Adjusted Mean multiplied by two.
Adjusted Mean: This is the sum of
the highest high, the lowest low, and the most recent closing price, divided by three.
Regular Low: Subtract the highest
high from the value of the Adjusted Mean multiplied by two.
Extreme Low: Subtract the lowest low
from the highest high and then subtract this value from the Adjusted Mean.
|
